Pearl Drilling Machine 280W 110V Driller Full Set Drill Holder for Shell Coral Amber Stone Jewelry Tools

How to Install
1. Install the depth regulator
2. Install the auxiliary handle.
3. Install the clamp.
4. Install the plastic round handles on both sides and adjust the spacing between the clamps.
5. Install the bottom dust hole.
6. Plug in the voltage and adjust the distance.

Specifications
Color: Black+ Yellow+Green
Model: KYD
Overall Material: Aluminum
Material of Foot Mat: Cast Iron
Material of Motor: Pure Copper
Material of Collets and Drill Bit: Plastic and Copper
Type: Jewelry Tools
Plug Type: US Standard
Voltage: 110V
Power: 280W
Speed: 0-15000 rpm
Suitable Diameter of Jewelry: 5-35mm/0.2-1.38inch
Diameter of Needles: 0.5mm/0.02inch, 0.8mm/0.03inch, 0.6mm/0.02inch, 1mm/0.04inch, 1.2mm/0.047inch
Clamping Range: 0.3-4mm/0.012-0.16inch
Gross Weight: 4.85kg/10.69lbs
Net Weight: 4.5kg/9.9lbs
Product Size: 23.5cm*10cm*11cm/9*3.9*4.3inch
Package Size: 30*20*20cm/11.8*11.8*7.87inch

Package Included
1 * Pearl Drilling Machine
1 * Pedal Switch
1* Bilingual Instructions(English+Chinese)
1* Tool Box
All Accessories for Use

Notes
1.Please strictly follow the instructions when you use this product.
2.Please tighten everything, including your pearl and needle!
3.Make sure that the drill bit has been tightened with T-lock and is in the center position.
4. You can use a very small stream of water to prevent cracking, and prevent the drill from being destroyed.
5. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

Description
When we walk into a jewelry store, a dazzling array of jewelry often attracts our attention. At this moment, our pace slows down and our hearts are satisfied. A piece of beautiful jewelry can not be separated from powerful drilling. Our pearl drilling machine is made of fine materials and workmanship, so we can provide you with quality assurance. High efficiency and simple operation procedures can provide symmetrical and exquisite jewelry in a short time.

Key Features
Exquisite Material: This drilling machine is mainly made of aluminum, which is wear-resistant and corrosion-resistant, so you can use it for a long time without frequent replacement, which will save you cost to some extent.

High Efficiency: The drilling machine uses a 280w pure copper motor, which consumes less energy, has a small resistance, and can rotate at 15000rpm. It can complete the drilling operation in a short time, so you don’t have to wait for a long time.

Adjustable Design: The drilling machine is equipped with a stepless speed regulation switch and depth adjuster for targeted drilling according to different jewelry to provide you with more refined pearls.

Multiple Sizes: The package includes 15 sets of special collets and drill bits made of plastic and copper, which can be used to drill most pearls without damaging them, and the fixing effect is good, fully meeting your needs.

Simple Operation: The drilling machine is equipped with a power auxiliary handle device and a pedal switch. You just need to place the pearl on the installed machine and then operate it through the handle and pedal switch without tedious steps, allowing you to focus on the drilling and create perfect crafts.

Small Floor Space: The product size is 9*3.9*4.3inch, which will not take up too much space. After use, it can be placed in the studio or room at will.

Easy to Clean: The drilling machine has a smooth surface and s small size, so you can clean it easily. You can just wipe the dust off with a towel.

Convenient Storage: The package of the drilling machine includes a storage box, which can store all kinds of small items, which is not only convenient for you to find but also conducive to preventing the loss of items.

Protective Packaging: The foam is used in the packaging of the drilling machiner, which can better protect the product during transportation and delivery.

Details
Bead Holder: This accessory enables the drilling machine to drill holes without regular cleaning of pearl powder chips, so as to ensure the long-term normal use of the drilling machine.

Needle Chuck: The product is equipped with twist needles of different sizes, with diameters of 0.02inch, 0.03inch, 0.02inch, 0.04inch, and 0.047inch respectively. When punching, you need to insert the needle slowly to avoid twisting the needle or breaking the bead.

Anti-slip Foot Mats: The drilling machine is equipped with a stable base with four foot mats made of cast iron, which can play the role of anti-slip and make the drilling machine run more stably, so your jewelry will not be damaged due to misoperation.

Application
The product is applicable to natural or synthetic jewelry with a diameter of 3-35mm/0.12-1.38inch, such as freshwater pearls, seawater pearls, South China Sea pearls, Tahiti black pearls, pearl oysters, coral, amber, gold, silver, copper and other accessories. At the same time, the product can also be widely used in jewelry stores, jewelry manufacturers, etc.